This KIT if for the Jeep Wrangler, 100 Series Land Cruiser and Bronco Gullwings (Not necessary of 80 Series wing install)
Xpress30 adhesives are one-component, conventional-cure adhesives. They eliminate steps and speed installations by incorporating glass primer into the urethane. They are primer-less to glass and require primer for the sheet metal wall & fiberglass hardtops.
Conventional-cure adhesives like Xpress30 are adhesively on temperature, humidity, and time to cure. The water in the air causes a chemical reaction in the adhesive. The adhesive bead cures from the outside to the center as the moisture diffuses into the adhesive. The curing bonds the adhesive to the substrates and the existing bead of urethane adhesive.
Applications Structurally bonded or direct glazed automotive glass, van windows, quarter glass, and other stationary glass Other uses, such as attaching hardware to glass and backfilling to install reveal moldings or other trim
